Custom 304 Stainless Steel Press Mould | 200 x 100 mm
- KTD-SS304-200100
- Natural stainless steel
-
Made to order | 304 stainless steel | AI-generated product illustrations
Made-to-drawing 304 stainless steel rectangular press mould with a 200 x 100 mm cavity, shouldered top punch and two 25 mm spacers. Request a custom quote.
Find Your Product
Paste a product URL from any website and send us an inquiry
Product details
Made-to-drawing rectangular press mould
A custom rectangular compression mould set in 304 stainless steel, with an open-through frame, a shouldered upper punch and two solid 25 mm spacer plates. The nominal frame cavity is 200 x 100 mm. The 270 x 170 mm punch head provides a shoulder around the lower pressing projection.
Product images are AI-generated design illustrations. They show the intended component arrangement. Final frame details, surface appearance and supplied parts follow the approved production drawing.
Dimensions and machining specification
| Material | 304 stainless steel |
|---|---|
| Nominal frame cavity | 200 x 100 mm, R5 internal corners |
| Clear cavity depth | 100 mm |
| Top punch head | 270 x 170 x 25 mm |
| Lower punch projection | 199.6 (-0.1) x 99.6 (-0.1) x 25 mm, R4.8 corners |
| Total upper punch height | 50 mm: 25 mm head plus 25 mm projection |
| Spacer plates | 2 identical solid plates, each 199.6 (-0.1) x 99.6 (-0.1) x 25 mm, R4.8 corners |
| Lifting threads in punch head | 2 x M10, 18 mm deep, 160 mm centre distance |
| Nominal thickness configurations | 75 / 50 / 25 mm with 0 / 1 / 2 spacer plates, according to the drawing stack |
| Pressing face and upper spacer face | Ground contact faces; Ra <= 0.8 as specified in the drawing |
| Geometric requirements | Pressing face perpendicular to punch sides within 0.05 mm; spacer flatness 0.1 mm over 200 mm |
| General tolerance | ISO 2768-mK; stated individual tolerances take precedence |
| Edge finishing | 1 x 45-degree entry chamfer on the punch; sharp edges broken and both spacer faces carefully deburred |
| Spacer construction | Fully solid; no drilling or tapping |
All dimensions are in millimetres unless stated otherwise. Material for this version is 304 stainless steel. Individual spacer thicknesses should be measured and marked; finish grinding is agreed where the finished stack height is critical.
Drawing and assembly confirmation
The source design references a 10 T press application. This is a drawing reference, rather than a tested load rating for a manufactured assembly. Confirm the complete frame design, press platen dimensions, available clearance and assembly compatibility before ordering. The frame exterior and finished assembly weight are confirmed in the production drawing and quotation.
The head is intended to bear around the frame rim at the end position. The spacer stack determines the drawing's nominal thickness configuration. Keep the frame bearing face clear; final fit and surface requirements are checked against the approved drawing.
Custom quotation
Send your drawing or reference, order quantity, destination and required finish. Specify whether you need the complete frame-and-punch set, replacement spacer plates or another agreed scope. Price, minimum order quantity, sample charges and production lead time are quoted for the confirmed specification.
Request a quotation for this 304 stainless steel mould | Explore custom products
Request a Custom Product Quote
Tell us what you need and the delivery country. We will confirm suitable options, quantities, samples and timing. Request samples or request a multi-product quotation.
Inquiry saved
You can continue browsing while our team reviews your request.